Articles

Liner
Intermediate string
Surface string
Production string
Conductor string
Stove pipe, marine conductor or foundation pile
Casing types definitions
Connections Selection and ordering
Connections Surface treatments
Casing Thread protectors
Connections Testing and qualification
Connection Thread compounds
Connection sealing
Reliability and structural integrity of connections
Casing Thread Compounds Friction Factors
Connection types
Monitoring Casing Wear
Monitoring Casing Condition
Casing wear and solutions
Minimising Casing Wear
Influence of wear on casing strength
Influence of fatigue on casing strength
Influence of corrosion on casing strength
Weight Set Tie-Back Packer Make-Up
Casing Operations Responsibilities
Casing and Liner Operations Planning
Casing and Liner Colour Codes
Casing Patches
External Casing Packers
Ordering casing
4 1/2" liner running program example
4 1/2" Liner running programme
Example Casing Centralisers Programme
13.3/8 " Casing Running Programme
Casing and Liner Handling
Running and Setting Tie-Back Packer
Casing and Liner Running Preparation Guidelines.
Hole Conditioning before Running Casing or Liner
Tie-Back Packers - General Information
Casing Centralisation
Procedure For Running 30” Conductor
Tie-Back Packers - PBR Clean Out and Packer Setting
Casing Setting Depths
Preparation for Running Casing
Liner Tie-Back String
Casing Storage, Handling and Transport
Liner Lap Testing - Inflow Testing
Mandrel Casing Hangers
Running and Testing Casing
Casing and Liner Pressure Testing
Casing and Liner Running Procedures
7" Liner Operations (Running and Cementing)
Casing Make-Up Torque
Installation loads
Service loads
Service loads
Post-buckling analyses
Fundamental equation for reduced axial force
Installation loads
Stove pipe, foundation pile, marine conductor and conductor string
Load bearing capacity
Pressure (Collapse and Burst) loads on casing
Resistance to buckling
Burst loads
Collapse loads
Pressure loads (burst and collapse)
Casing Design Loads
Liner hanger selection - Design criteria
Detailed Design and Analysis
Basic aspects of rock mechanics
Casing scheme selection
Casing Design parameters
Casing design considerations
Procedures for leak-off and limit tests (LOT, LT, FIT)
Casing design factors
Gravity structure
Slim hole well
Permafrost well
Reservoir compaction environment
Deep-water well
HPHT well
Gas-lift well
Squeezing salt well
Steam well
Horizontal well